1. Inserting a hydraulic reference point doesn't erase an existing ref point at the same location

2. New ref points in HydraCALC are not using the values of the HYD ref points.

When I use Pretty Sprinklers, all the nodes that were attached to my sprinklers when using All Ref Points disappeared. 
When trying to get them back by re-running All Ref Points, they don't reappear.

AutoCALC is creating extra node points where there shouldn't be.  In the image below, node 45 shouldn't be created as there's neither a flowing head nor a change in diameter at that point.

'extra node'

'extra ref point'

'extra reference point'

'refpt'

When I use Pretty Sprinklers, all the nodes that were attached to my sprinklers when using All Ref Points disappeared. 
When trying to get them back by re-running All Ref Points, they don't reappear.

Error placing Reference Points or Demand Area annotation... The 3D view ownerDBViewId is not locked.

Step 1a.1 - Error box - missing Pipe Type pointing to Ref 1 & Ref 2

can also be Step 1a.4

Dummy reference points cannot find the dummy ref point block in the drawing's block table. **Possible there's a missing registry entry** Dialog box 52.04

Step 1a.10 - "Attaching Node 2 Elevations" User ID Duplicated Dwg ID Dup for User ID

Duplicated hydraulic ref points

Bad ref point block Dialog box

When plotting to Bluebeam document, some HydraCAD drawing entities show up blacked out.

AutoCAD view;

PDF generated by Bluebeam;

When attempting to create a 3D model, you get the error; Please switch to System Model to Annotate Drops and Sprigs plus

System.NullReferenceException: Object reference not set to an instance of an object

at HCADexports.RevitConversion.create_hydrapipes_from_db()

at HCADexports.RevitConversion.create_hydrafittings_from_db(List'1 pipes, List'1 heads)

Pop-up immediately after selecting RTS Points

The location that your document is saved in cannot be used. Please select that folder that you would like RTS data saved to,

When trying to run the calculation, you get the message, 

"The system flow demand of ### exceeds the maximum rated flow as indicated in the Pump Curve for the pump with the inlet of PI and outlet of PO.  The calculation will not continue"

But your flow is a very large number

When running the Line Couplings command (LC), you get the error, "No branch lines found crossing the line(s) you picked", even though it's 100% a fact the lines are intersecting

Double-clicking your HydraCALC icon makes nothing happen.  You do not see HydraCALC open onscreen nor on your taskbar.  HydraCALC does not open other than in the task manager.

If you open your task manager and see the app "Hyd_prog.exe" open but not on your taskbar, then the application is stuck in purgatory.

Another possibility may be that it's on the taskbar but not on your screen.  That means it's open but offscreen. 

See this HydraCARD to fix that issue;  HydraCARD 565 only AFTER you've checked on the solution below.

When running the "FSC Setup" to "Create FSC Definition". 
Upon finishing the block definition, the block definition is missing a crucial property for "Hydraulic equivalent length is referenced by:". This field will show blank or the default generic text and did not include the HydraCALC pipe/fitting reference information.

There is a missing HydraCALC "ImportExport" directory.

Default line text:
`Hydraulic equivalent length is referenced by: shortname with length number - longname Listing: FM`

System.NullReferenceException: Object reference not set to an instance of an object.

Upon calculating a file, the error message, "Failed to launch C:\HES\Hydratec for revit\programs\calcdiagnose.exe" pops up.

Was preceeded by these messages;

Plus this;  Number of Loops -1 and or Nodes with undesignated elevations

After running the AutoCALC process on a long grid system, you realize some of the gridlines in the middle didn't get picked up.

When starting the AutoCALC process, you get this error;

Could not find fitting match for Pump Only/Test Point Please check!!

You also see an Accessing Database window with a partial green progress bar.

No Operating Heads of Flows Found!!  Please check...