AutoCAD Based Cards
Total: 692
* On smaller devices swipe left to view hidden table data
| Ribbon/Toolbar (Software) | Button | Function | Error Type | Description | ||
|---|---|---|---|---|---|---|
| Ribbon/Toolbar (Software) | Button | Function | Error Type | Description | ||
| Card 1372 View | Opening a Drawing (AutoCAD Based) | None | None | None | When opening AutoCAD, you get an error saying "a software problem has AutoCAD to close unexpectedly" Upon reviewing the file it's crashed on, it shows HCAD_MAKEFIGHANGERLIST as the culprit
|
|
| Card 1350 View | Opening a Drawing (AutoCAD Based) | None | None | None | After opening AutoCAD and a drawing, you have a dead area where you can't draw nor does anything display. Usually next to a compressed palette. Note in the image below how the crosshairs do not extend to this area.
|
|
| Card 1306 View | Opening a Drawing (AutoCAD Based) | None | None | None | Running HydraCAD commands do not work in one drawing, but will work in a different drawing in the same session of AutoCAD/HydraCAD. Inserting a pipe dimesion gives an 'unknown command' message.
|
|
| Card 1280 View | Opening a Drawing (AutoCAD Based) | None | None | Security Error | NOTE - If you are getting this message when opening AutoCAD/HydraCAD by using your desktop icon, see HydraCARD #260.
When opening, closing, or saving a specific drawing, you only receive this error message and not a HydraKEY security error with the golden X.
After AutoCAD opens, press F2 to view the command prompt, see if the text below appears. This may or may not be related, IDK. Is 2024; error: no function definition: PRINTEM
You will likely this message as well;
All of the possible directories for storing temporary files either do not exist or are readonly. Please correct this situation before running AutoCAD again.
|
|
| Card 1047 View | Opening a Drawing (AutoCAD Based) | None | None | None | Drawing looks strange, piping looks hollow and sprinkler heads a little off and Acad background looks greyish/grayish.
Drawing also seems to lag when panning, processes take longer
|
|
| Card 1361 View | Listing (AutoCAD Based) | Start Autolist | None | Error With Drop/Sprig | After starting the AutoLIST process, you get an error saying, "Error with Drop/Sprig annotation... This one will be displayed"
After clicking OK, HydraLIST opens but you won't see any cut lengths of your sprigs and drops in the layer DropSprigTextCL |
|
| Card 1320 View | Listing (AutoCAD Based) | Start Autolist | Hydralist Opens | None | After running an Autolist, in HydraLIST and the LINES tab you have a listing tag ID called RM
|
|
| Card 1278 View | Listing (AutoCAD Based) | Start Autolist | None | Missing Pipe Dimension | After Autolist has run, your drawing doesn't display any cut pipe dimensions. Only cut vertical pipes/riser nipples are visible, but not the megenta PIPEX block
|
|
| Card 1191 View | Listing (AutoCAD Based) | Start Autolist | None | Fatal Error | When attempting to 'Start AutoLIST' (SAL command), user gets an AutoCAD Fatal Error.
|
|
| Card 1164 View | Listing (AutoCAD Based) | Start Autolist | None | File To Load Paths And Dirs. | When starting the listing process, you get this error
File Location Error Please browse to set stocklist location. It must be a valid path. Then try again |
|
